Get a ZipWall® 12 – 6-Pack and a SidePack™ Wall Mount Kit for Only $499!

Save $156.90! Includes Free Shipping.
Hurry! Offer ends 6/19/24 midnight PT.

( ZipWall 12 6-Pack regularly $419.95, SidePack Wall Mount Kit regularly $235.95)

ZipWall 12 6-Pack: Six spring-loaded poles secure a dust barrier up to 12 feet high and 50 feet wide. Or, create a room-within-a-room. Strong and lightweight anodized aluminum construction. Innovative non-skid, non-marking head and plate. Package contains six poles with parts (heads, plates, and FloorGrip™ non-slip pads). Quick & easy to set up — no ladders, no damage.

SidePack Wall Mount Kit: Seal a barrier along two walls without tape in minutes! Everything you need to seal a ZipWall® dust barrier along two walls, up to 9 feet high each. Contains six 3 foot FoamRail™ tapeless seals, six SideClamp™ wall mounts, and a carry bag. Works with all ZipWall® dust barrier poles.

Limit: 5 specials per customer.



Free shipping on orders over $50.


ZipWall 12 6-Pack

ZipWall® 12 spring-loaded dust barrier poles are designed for the professional contractor. They are easy to use, easy to store, and a significant time saver! These poles are strong and lightweight, telescope up to 12 feet high and twist to lock. Each spring-loaded pole takes seconds to set up without a ladder. The innovative non-skid, non-marking head locks the barrier material, allowing it to be raised with the pole, and holds it securely in place without damaging the ceiling. A tight dust barrier can be set up in just a few minutes, one pole at a time, without ladders, tape, or damage.

The ZipWall® 12 poles are the prime ZipWall® poles. Anodized aluminum construction makes them sturdier than stainless steel, smoother to raise and to lock, and the best foundation for ZipWall® accessories like FoamRail™ tapeless seals. These poles are built for heavy use and their size is perfect for both residential and commercial jobs.

A 20 foot anodized aluminum pole is also available.

Six poles can be used to create a dust barrier up to 50 feet wide, or a three-sided room-within-a-room with two poles to spare. The 6-Pack is a great way to get started with the ZipWall® Dust Barrier System, or to add to an existing set of ZipWall® dust barrier poles.

Key features

  • Spring-loaded design for quick, easy, and safe setup
  • Strong and lightweight anodized aluminum construction
  • Telescope up to 12′ (from 4′ 7″)
  • Innovative non-skid, non-marking head and plate
  • Each pole weighs just 2 lb
  • GripDisks™ prevent sliding on smooth floors
  • Work with positive and negative air
  • Help comply with the EPA RRP rule

Contents Six 12′ anodized aluminum spring-loaded poles with parts (heads, plates, and FloorGrip™ non-slip pads). Plastic sheeting is not included.

SidePack Wall Mount Kit

After a dust barrier is in place, it can be sealed more tightly using FoamRail™ tapeless seals. The SidePack™ kit contains everything you need to seal a barrier along two walls up to 9 feet each.

Each SideClamp™ wall mount snaps onto a FoamRail™ tapeless seal. When mounted on the ZipWall® pole closest to the wall, the rail presses the barrier material against the wall and forms a tight seal. The SidePack™ kit can seal two walls up to 9 feet high each. It comes with a handy carry bag, ready for the next job.

Key features:

  • Creates a tight seal without tape in minutes
  • Innovative FoamRails snap onto wall mounts and press the barrier against the wall
  • Reusable and cost-effective
  • Can be used with negative or positive air
  • A convenient carry bag is included
  • Works best with ZipWall® 12 poles
  • Can be used with plastic sheeting or ZipSheet™ Reusable Barriers – not included


Contents Six 3 foot FoamRail™ tapeless seals with T-Clips™, six SideClamp™ wall mounts, and a carry bag.

Tips for setting up a dust barrier

  • When using plastic, cut it to size ahead of time.
  • Set up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.

Once ALL poles are in place, do the following:

  • Tuck the plastic under each pole.
  • Place a GRIP DISK on the floor under the pole.
  • Compress the spring at the top of each pole all the way up.

IMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.

Attach each of the SideClamp™ wall mounts to a FoamRail™ tapeless seal, and mount it onto the pole closest to the wall.

Start at the bottom and work your way up. The rails can easily be overlapped if necessary.

How to set up a dust barrier in minutes

How to seal a barrier at the walls without tape.