Buy a ZipWall® 12 4-Pack and get 2 FoamRail Span Tapeless Seals and a SideBridgeWall Mount 4-Pack FREE!

Save $159.64!
Hurry! Offer ends 5/15/24, midnight PT.

(ZipWall® 12 4-Pack regularly $295.95, 2 Spans  regularly $123.66,  SideBridge™ Wall Mount 4-Pack, regularly $35.98 )

Set Up a Dust Barrier in Minutes and Seal it Without Tape!

The ZipWall® 12 4-Pack secures a dust barrier up to 12 feet high and 30 feet wide. Spring-loaded, telescoping, twist-locking poles make set up quick and easy.  Self-adhesive zippers let you create an entryway in the barrier wherever you need it. The handy carry bag makes transport and storage easy.

The SideBridge™ Wall Mount quickly  snaps onto a FoamRail Span™ Tapeless Seal and holds it against a ZipWall® Dust Barrier Pole pushing the barrier material against a wall to form a tight seal. SideBridge Wall Mounts come in two lengths, standard and long. The long wall mounts are used to seal around obstacles like baseboard radiators and crown molding. Each SideBridge Wall Mount 4-Pack includes two standard size and two long wall mounts. The Span extends from 4 feet 3 inches to 8 feet and easily adjusts to fit the job. It can also be used to seal along the ceiling, or with a floor adaptor (not included), along the floor. Seals up to 8 feet with one pole! No ladders, no damage!

Limit: 5 specials per customer.

 

 

S4SPB

$295.95

Free shipping on orders over $50.

Description

This Limited-Time Special Includes:

ZipWall® 12 – 4-Pack

Four spring-loaded poles secure a dust barrier up to 12 feet high and 30 feet wide. Or, use them to build a 3-sided room within a room.  Create an entryway wherever it’s needed with the included self-adhesive zippers. A handy carry-bag makes everything easy to find and transport. It’s the perfect ZipWall® starter kit!

Key features:

  • Spring-loaded design for quick, easy, and safe setup
  • Strong and lightweight anodized aluminum construction
  • Telescope up to 12′ (from 4′ 7″)
  • Innovative non-skid, non-marking head and plate
  • Each pole weighs just 2 lb
  • FloorGrips™ prevent sliding on smooth floors
  • Work with positive and negative air
  • Help comply with the EPA RRP rule


Contents Four 12′ anodized aluminum spring-loaded poles with parts (heads, plates, and FloorGrip™ non-slip pads), two standard zippers, and one carry bag. Plastic sheeting is not included.

SideBridge™ Wall Mount 4-Pack

FoamRail™ tapeless seals are a quick and effective way to seal a barrier tightly after it is set up. The SideBridge™ is used in conjunction with a FoamRail Span™ to seal a barrier along the wall.

The SideBridge™ snaps onto a FoamRail Span™ and holds it against a ZipWall® pole to form a tight seal. One Span™ can seal up to 8 feet along the wall. The SideBridge™ also works with the FoamRail Span™ Mini to seal up to 4 feet along the wall.

Key features:

  • Specifically designed to work with the FoamRail Span™
  • Seals tightly around obstacles like baseboard radiators, window sills, and crown molding
  • Can be used with negative or positive air
  • Reusable
  • Easy to use

 
Contents: Two standard and two long SideBridge™ wall mounts.

2 FoamRail Span™ Adjustable Tapeless Seals

To seal a barrier tightly at the ceiling, just snap the Span™ onto any ZipWall® pole,  and raise the pole to press the plastic – or ZipFast™ panels – firmly against the ceiling. Use it with a Floor Adaptor to seal tightly at the floor.

The Span™ can seal up to 8 feet with one pole. It easily adjusts to fit, extending from 4 feet 3 inches up to 8 feet.

FoamRail™ tapeless seals prevent dust from escaping the work area during remodeling, renovation and repair. Unlike tape, the FoamRail™ product line is reusable and provides a robust dust control solution that will stay up. It can be used with negative or positive air, and is especially useful for construction work in locations like health care facilities, restaurants, retail space, office buildings, and any occupied residential or commercial property.

Key features:

  • Seals a dust barrier without tape in seconds
  • Requires no ladders and leaves no damage
  • Extends from 4 feet 3 inches to 8 feet
  • Aluminum construction with compressible foam
  • Reusable and cost-effective
  • Can be used with negative or positive air
  • Works with all ZipWall® poles
  • A great alternative for tape when tight sealing is required

 
Contents: Two adjustable tapeless seals.

 

ZipWall 12 Dust Barrier Poles


Tips for setting up a dust barrier

  • When using plastic, cut it to size ahead of time.
  • Set up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way.

 
Once ALL poles are in place, do the following:

  • Tuck the plastic under each pole.
  • Place a GRIP DISK on the floor under the pole.
  • Compress the spring at the top of each pole all the way up.

 
IMPORTANT: Placing a GripDisk™ non-skid pad under each pole ensures the barrier will stay securely in place even on smooth floors or when used with negative air pressure.


SideBridge™ Wall Mount

FoamRail Span™

Extend the Span™ and flip the red tab to lock it at the desired width. IMPORTANT: Notice the arrows on the red slide – the direction of extending the Span™ is essential to its proper function.

To seal a dust barrier at the ceiling, snap the Span™ onto the ball joint of a ZipWall® pole, raise the pole with the attached Span™ to the ceiling, and lock it into place.

To seal a dust barrier at the floor, use Floor Adaptors. Replace the foot of the pole with a Floor Adaptor, place the Span™ on the floor, snap the pole onto it and set up the pole. Note: A barrier can be sealed at the ceiling and floor simultaneously with one pole.

How to set up a dust barrier in minutes


Related video: Seal a Dust Barrier at the Floor